Touch Digitizer + Bezel

This part has Touch digitizer glued with Bezel.
Reuse original back cover, screen and screws, video cable, mountings.

Installation steps:
- unplug battery and power supply;
- remove broken touchscreen assembly (use pry tool or heat gun depending on the laptop);
- separate your screen from the broken touchscreen (usually these two parts glued);
- attach your screen to the new touchscreen using double-sided adhesive tape;
- secure this touchscreen assembly to the frame of a laptop (snap to the frame or use double-sided adhesive).

View all part types


last updated April 23, 2020