1326

Kostenlose Rücksendung
für USA und Kanada
screen repair
1-855-630-1111
+1-206-299-0699 outside of continental US and Canada
LIVE CHAT Offline
Montag bis Freitag: 09-21 Eastern Time
SUPPORT Contact
24/7
We ship from Seattle, WA and Vancouver, BC
FREE US and Canada shipping for 10+ screens orders
Our inventory is live, over 29800 screens in stock!

VOM LAPTOP-BILDSCHIRME LG PHILLIPS, AUO,
SAMSUNG, HANNSTAR, CHI-MEI Details

Bildschirm Ersatz Videos 1250
Jetzt ansehen!
Alle Bildschirme sind ganz neu
Wir schicken Sie Ihre Bestellung am gleichen Tag

APPLE iPAD 2 CDMA ERSATZ LCD-BILDSCHIRME UND GLAS DIGITIZER AUS $23.99
BRANDNEUE


Apple IPAD 2 CDMA  screen replacement
Apple IPAD 2 CDMA  screen replacement

Item ID: 913835
 
iPad 2 Touch Screen Glass Digitizer
Kompatibilität: 

Apple iPad 2 CDMA

Zustand: 
New Aftermarket Replacement ?
Garantie: 
3 Years
 
Adhesive tape
 
Tool set
 
Not OEM part
Note: 
White colour, NO Home button & NO camera hook - use your original ones
Dieses Produkt ist auf Lager
$29.99 USD
$23.99 USD wenn Summe Produkte im Warenkorb ist 2+
Hinzufügen
10+ available
$33.29 CAD
 ≈ $29.99 USD 
 
 ≈ €22.8 EUR 
 
 ≈ £18.09 GBP 

Apple IPAD 2 CDMA  screen replacement
Apple IPAD 2 CDMA  screen replacement

Item ID: 634935
 
iPad 2 Touch Screen Glass Digitizer
Kompatibilität: 

Apple iPad 2 CDMA

Zustand: 
New Aftermarket Replacement ?
Garantie: 
3 Years
 
Adhesive tape
 
Tool set
 
Not OEM part
Note: 
Black colour, NO Home button & NO camera hook - use your original ones
Dieses Produkt ist auf Lager
$29.99 USD
$24.99 USD wenn Summe Produkte im Warenkorb ist 2+
Hinzufügen
10+ available
$33.29 CAD
 ≈ $29.99 USD 
 
 ≈ €22.8 EUR 
 
 ≈ £18.09 GBP 

Apple IPAD 2 CDMA  screen replacement
Apple IPAD 2 CDMA  screen replacement

Item ID: 530884
 
iPad 2 Touch Screen Glass Digitizer
Kompatibilität: 

Apple iPad 2 CDMA

Zustand: 
New Aftermarket Replacement ?
Garantie: 
3 Years
 
Home button
 
Camera hook
 
Adhesive tape
 
Tool set
 
Not OEM part
Note: 
White colour
Dieses Produkt ist auf Lager
$29.99 USD
$24.99 USD wenn Summe Produkte im Warenkorb ist 2+
Hinzufügen
$33.29 CAD
 ≈ $29.99 USD 
 
 ≈ €22.8 EUR 
 
 ≈ £18.09 GBP 

Apple IPAD 2 CDMA  screen replacement
Apple IPAD 2 CDMA  screen replacement

Item ID: 593852
 
iPad 2 Touch Screen Glass Digitizer
Kompatibilität: 

Apple iPad 2 CDMA

Zustand: 
New Aftermarket Replacement ?
Garantie: 
3 Years
 
Home button
 
Camera hook
 
Adhesive tape
 
Tool set
 
Not OEM part
Note: 
Black colour
Dieses Produkt ist auf Lager
$29.99 USD
$24.99 USD wenn Summe Produkte im Warenkorb ist 2+
Hinzufügen
$33.29 CAD
 ≈ $29.99 USD 
 
 ≈ €22.8 EUR 
 
 ≈ £18.09 GBP 

Apple IPAD 2 CDMA  screen replacement
Apple IPAD 2 CDMA  screen replacement

Item ID: 161548
 
iPad 2 LCD Screen
Kompatibilität: 

Apple iPad 2 CDMA

Zustand: 
New Grade A+ ?
Garantie: 
3 Years
Note: 
LCD ONLY (WITHOUT TOUCHSCREEN)
Dieses Produkt ist auf Lager
$59.99 USD
$50.99 USD wenn Summe Produkte im Warenkorb ist 2+
Hinzufügen
10+ available
$66.59 CAD
 ≈ $59.99 USD 
 
 ≈ €45.61 EUR 
 
 ≈ £36.19 GBP 


Häufig zusammen gekauft:

Screen Replacement Tool Kit is a must have to repair laptop, tablet and smartphone screens.

Mehr info
$22.99
Add
Quality Suction Cup. 2 1/8 inch (55mm), 25lb lift power.

Mehr info
$5.99
Add

Installation guideiPAD Mini iPAD 3 iPAD 2 iPAD 1

iPAD 2 LCD Screen and Glass Digitizer installation guide

Please watch the following video (highly recommended), or follow the step by step instructions below:




iPad two digitizer is glued onto the main body, and prior to removing it, you must note a few danger zones,
which will require your special attention in order to open the device with the least damage caused.

It is very important to note, that the wireless antenna is glued to the glass, and needs to remain with the body, when the glass is separated.
Please make sure you are paying extra attention to that area when working through the glue.
As well as the volume and power buttons cable can be damaged in two spots. You should be extremely careful around those areas,
since breaking those cables will disable vital functions, and will require extra parts and time to repair.
This is a guide on reinstalling the front glass digitizer and the LCD display on the second generation Apple iPad.
There's plenty of adhesive in the iPad, and it helps knowing where it is located.
First there is the outer edge, where the plastic rim surrounding the glass meets with the aluminum groove.
Then there is the second ring of adhesive which bonds the glass to select parts of the body.
And last, there is a foamy dust shield around the LCD screen which also adheres to the actual glass.
As usual we are using the most basic tools such as a putty knife and a small philips screw driver.
However if you have access to a heat gun, or a hair dryer, you may consider using it to soften the adhesive around the edges.
The best place to start opening the iPad is the right bottom corner, just a few inches away from the wireless antenna.
Please note, even though the plastic lip is part of the digitizer assembly, we recommend inserting your putty knife between the glass and the plastic,
that way you can prevent leaving marks on the aluminum body. However you will not be able to reuse the original digitizer anymore.
In our case the digitizer is clearly broken, and we strongly caution users to not open their iPads unless they are actually broken.
Please note, even though the plastic lip is part of the digitizer assembly, we recommend inserting your putty knife between the glass and the plastic,
that way you can prevent leaving marks on the aluminum body. However you will not be able to reuse the original digitizer anymore.
In our case the digitizer is clearly broken, and we strongly caution users to not open their iPads unless they are actually broken.
Gently work your way around the edges, moving from the right side to the left, going back and fourth on each edge, until full separation is achieved.
The adhesive is fairly strong, so please make sure you are positioning your knife in a controlled manner,
so that you are able to safely apply the force needed and are able to prevent damage from the knife.
Take extra care around the webcam area, and try to use fingers whenever possible.
Once you have separated the right edge, make sure to separate the Wi-Fi antenna from the digitizer before proceeding any further.
Now that the antenna is secured it is safe to continue separating the glass away from the body. In cases when the digitizer is badly damaged,
it may have to come out in small pieces. Open the digitizer as far as you can, and proceed with removing the LCD screen.
It has to come out first so the digitizer can be disconnected.
Remove four phillips screws securing the LCD panel in place.
Then lift the LCD panel, and use a flat pick or a screw driver to open the video connector's bracket and to disconnect the screen. Place the screen aside.
Then, using the same pick, open the digitizer connector's latches, there are two of them on the opposite side of where the ribbon cable slides out.
It is very important to make sure that the latches are properly open, since forcefully removing the ribbon cable will most likely cause irreversible damage to the connector,
and the entire logic board will have to be replaced.
Separate the old digitizer completely. In this case the digitizer is severely damaged, and we recommend cleaning up the remaining glass above a garbage bin,
since glass pieces are tiny and extremely sharp, it is best to contain them immediately.
Once you have cleaned up the main body of the remains of the original digitizer, everything can be put back together.
Reconnect the LCD display's video connector. Make sure the connector is plugged in all the way, and the bracket is closed properly with a screwdriver.
Slide the replacement glass underneath the LCD and reconnect the digitizer connector. Ensure that both connector latches are up before sliding the ribbon cable in.
Using a screwdriver guide the ribbon cable back in place and secure both latches.
Then flip the screen back into the original position
And secure the four Phillips screws.
In order to properly close and seal the digitizer, some preparation must be conducted.
We highly recommend that you ensure that there are no inward nicks or dents on the most outer rim of the body.
It is typical for the iPad to have some dents on the corners, and the original point of impact which broke the digitizer.
Use a screw driver and pliers or any other suitable tools to bend out all the imperfections,
so that the new digitizer can sit perfectly flush to the body.
To seal the digitizer we are using Scotch branded 3M double sided adhesive tape. You could use some other forms of adhesive like superglue,
but it is best to use something which can be opened for service afterwards. You must do your best to clean out as much of the old adhesive as possible.
Then cut your tape in appropriate width pieces. Strips of approximately 2 millimetres have to line the entire perimeter of the body in the outer groove.
Use your screwdriver to properly position the adhesive in the groove.
Then place appropriately sized pieces all around the second adhesive perimeter.
At this point you could close the digitizer. However we highly recommend that you carefully inspect the surface of the LCD display,
and remove any smudges, dirt, fingerprints, hairs, or anything else visible on the screen, since you would have to reopen the glass and reapply adhesive in order to clean up the screen.
Close the digitizer starting from the left edge, ensuring that the plastic rim is sitting flush to the groove.
It takes some patience to align the plastic rim and you could use an exact-o-knife to carefully shave off some plastic to properly sink it into the groove.
Once a proper alignment is achieved, apply weight on top of the iPad, and let it sit overnight for the adhesive to properly cure.
And you are done.


Installation guideWATCH LAPTOP SCREEN REPLACEMENT VIDEO

Video von unserem Kunden Deb Deppeler ersetzen den Bildschirm auf ihre Apple IPAD iPad 1
Klicken Sie hier um die 1250 Bildschirm-Ersatz-Lernprogramme, die von uns und unseren geliebten Kunden gemacht

    Verwandte Produkte, die IPAD 2 CDMA kompatibel Notebook LCD Bildschirm:
IBOOK G4 14 MODEL A1055IBOOK G4 14 MODEL A1134IBOOK M6497IPAD 1 WI-FIIPAD 1 WI-FI 3GIPAD 2 CDMAIPAD 2 GSMIPAD 2 WI-FIIPAD 3 LTEIPAD 3 WI-FIIPAD 4 WI-FI
In English: Apple IPAD 2 CDMA Laptop LCD ScreenEn français: Apple IPAD 2 CDMA Portable LCD ÉcranIn italiano: Apple IPAD 2 CDMA Notebook LCD SchermoНа русском: LCD Матрица для Apple IPAD 2 CDMAEn español: Apple IPAD 2 CDMA Portatil LCD Pantalla

Apple IPAD 2 CDMA LCD-Bildschirme Qualität

Unsere Firma vertreibt echte Apple IPAD 2 CDMA Laptop-Bildschirme der unübertroffene Qualität. Apple IPAD 2 CDMA LCD-Bildschirme sind produziert von renommierten und anerkannten Herstellern. Die Bildschirme unserer Firma verkauft werden mit der gleichen Qualität wie die, die Laptop-Hersteller verwenden in ihrer derzeitigen Laptop-Modelle. Zur Herstellung von Laptop-LCD-Bildschirm ist eine komplexe Aufgabe, und als Folge gibt es keine Generika oder gefälschte Apple IPAD 2 CDMA Bildschirme auf dem Markt.

LCD / Notebook-Bildschirme werden ausschließlich von Großkonzernen wie AUO, Chi-Mei, Toshiba, Hannstar, Chunghwa, Samsung, LG Philips, Sharp hergestellt. Diese sind weltweit anerkannten Anbieter von elektronischen Bauteilen. Sie stellen eine Reihe von Produkten, angefangen von interne Kabel, Motherboards, LCD-Bildschirme, Festplatten, DVD-Laufwerke auf Tastaturen.

Sie können ihre offiziellen Websites zu besuchen, um mehr über diesen Hersteller zu erfahren:

AUO
Chi Mei Optoelectronics
Samsung
Hannstar
Toshiba
LG Philips
Scharf
Hydis Hundai

Bitte lesen Sie unsere FAQ UND WAREN Abschnitt für die Installation Führer oder für jegliche Fragen zu Bezahlung, Versand, Warranty Policy Zusammenhang usw.

High quality after-market replacement

Some of the glass digitizers (top glass part of screens found in tablet and smartphones) sold by us may be classified as after-market replacements.

Such items are produced by third party manufacturers and are individually hand picked by us to be of highest quality, to meet all reference specifications, and to be fully compatible and to work as plug and play direct drop-in replacements. The high quality aftermarket replacements are covered by our 3 year warranty.

They have not been manufactured by OEM manufacturer and there are no original manufacturer's logos or trademarks on the item.