This is a general LCD replacement tutorial made by LaptopScreen.com. Not your specific model? Click here to search our video library for a model specific guide.
Step-by-step LCD Installation Instructions for HP DV6000
3 Remove 6 bezel screws. Note that there are 2 longer screws at the bottom and 4 shorter ones at the top.
4 Now you can remove the bezel. Pry open the plastic away from the screen on one side, then move to the top towards the other side and finally to the bottom. Don't apply too much force, since you can break the plastic.
6 Remove 2 frame screws on each side of the screen. As you reach the last screw secure the LCD with your hand in order to prevent the screen from falling.
9 Take out new LCD. Place a paper tower or a cloth on the keyboard to protect the new screen against scratches first, then place the screen on top.
11 Reconnect the video cable and secure the video connector with its tape. Be very careful and don't apply too much force while reconnecting the video cable since it is very fragile.
15 Test the new screen. Connect the power and turn on the laptop. If the start up graphics appear the screen is installed correctly. Turn off the laptop and disconnect the power again.
16 Replace the bezel. Start at the bottom and move up to the top gently snapping the plastic around the perimeter.