Replacement of screen on Clevo N960KR screen made by LaptopScreen.com

Tools

For the replacement process we'll need the following tools: Tweezers and a Plastic pick

Shut down the laptop

To begin turn the laptop off and disconnect the power cord

Remove the bezel

Start by removing the bezel. Pull the inner edge of the bezel away from the screen unsnapping the
tabs underneath. Go along the perimeter

Remove adhesive strips

The screen is held in place with adhesive strips with loose tabs hanging in the bottom of the screen.
Using tweezers pick the tab on the left side and pull out the adhesive strip. Pull out the adhesive strip
on the right side. Use a plastic pick to separate the LCD screen from the back cover and place it on
the keyboard

Disconnect the video cable

Peel off the clear tape securing the video connector. Disconnect the video cable. Discard the old screen

Connect the new screen

Place the new screen on the keyboard. Reconnect the video cable. Secure it with clear tape.
CAUTION! It is very important not to force any of the connectors. As well you must not twist or slant
the connector when plugging it in

Test the new screen

Now we can test the screen. Lift the screen up and turn the laptop on. The screen is working and we
can finish the installation process

Install the new screen using adhesive strips

Place the screen back on the keyboard. Your new display may not come with adhesive. We offer
standard double-sided tape for such repairs on our site:
https://www.laptopscreen.com/English/section/tools/
Apply new strips and remove the protective plastic. Lift the screen up and apply some pressure on the
sides of the screen

Replace the bezel

Press firmly in the bottom corners snapping the tabs back in place. Go along the perimeter. Use a
plastic pick to close the bezel near the hinges and along the bottom of the screen.

Turn the laptop on and we're done!