Laptop screens for all brands from $34.99 since 2009
Warranty Shipping Payment Returns About Us Contact Us Address PO Orders For New Suppliers Discounts The Blog FAQ Support Articles Testimonials
Eng
esp fr de it
CAD
USD CAD
Orders Support Tickets Log in New Customer
Cart
  • Warranty
  • Shipping
  • Payment
  • Returns
  • About Us
  • Contact Us
  • Address
  • For New Suppliers
  • Discounts
The Blog FAQ Support Articles
We ship from:
Newark, DE
Toronto, ON Vancouver, BC
QUANTITY DISCOUNTS
PO WELCOME
Live Chat Online
SUPPORT 1-855-630-1111

1-855-630-1111 +1-206-299-0699 outside of continental US and Canada

Laptop & Tablet Screens Tools, Adhesive tape Installers Find installer near you  
Home  /  Tutorials  /  Lenovo  /  THINKPAD T480s

Replacement of screen on Lenovo ThinkPad model: T480s screen made by LaptopScreen.com

Click here to buy the screen for Lenovo THINKPAD T480s

Tools

For the repair we will need the following tools: Plastic pick and Phillips screwdriver

Shut down the laptop

To begin turn off the laptop and disconnect the power cord

Remove the bezel

The bezel is held in place with tabs and adhesive along the inner perimeter.
Move the plastic pick along the inner perimeter releasing the edges from the adhesive.
At the same time start unsnapping the tabs along the perimeter. Remove the bezel and set it aside

Remove four screws

Using a Phillips screwdriver remove four screws holding the screen at the corners.
Place the LCD screen on the keyboard

Disconnect the video cable

Peel off the clear tape securing the video connector.
Open the connector's bracket. Disconnect the video cable. Discard the old screen

Connect the new screen

Place the new LCD screen on the keyboard. Reconnect the video cable. Close the connector’s bracket.
Secure it with a clear tape

Install the new screen

Lift the screen up making sure that the video cable stays in the right position.
Replace the Phillips screws in four corners

Test the new screen

Now we can test the screen. Turn the laptop on and if start up graphics appears we can finish
the installation process

Replace the bezel

Start from the bottom then go around the perimeter snapping tabs back in place.
Close the laptop and using the plastic pick make sure that the bezel in snapped along the
bottom of the screen.

Turn the laptop on, and we are done!


Back to top

This website is SSL secured!
Company
Warranty
Shipping
Payment
Returns
About Us
Address
What we sell
Laptop & Tablet Screens
Tools & Cleaners
Support
Contact Us
Support Tickets
New Customer
Find Us:
® Trade-mark of Interac Inc. Used under licence ©
2005 — 2026 Laptop Screen Int. Inc. Unauthorized Reproduction Prohibited
Privacy Policy Terms of Use
Select Language
French German Italian Spanish
Privacy Policy
Terms of Use