Laptop screens for all brands from $34.99 since 2009
Garantie Versand Zahlung Kehrt Zurück About Us Kontaktiere Uns Adresse PO Orders Für Neue Lieferanten Rabatte Der Blog FAQ Support Artikel Referenzen
De
eng esp fr it
USD
USD CAD
Aufträge Support-Tickets Einloggen Neukunde
Warenkorb
  • Garantie
  • Versand
  • Zahlung
  • Kehrt Zurück
  • About Us
  • Kontaktiere Uns
  • Adresse
  • Für Neue Lieferanten
  • Rabatte
Der Blog FAQ Support Artikel
Wir versenden von:
Newark, DE
Toronto, ON Vancouver, BC
QUANTITY DISCOUNTS
PO WELCOME
Live-Chat Online
UNTERSTÜTZUNG 1-855-630-1111

1-855-630-1111 +1-206-299-0699 außerhalb der USA und Kanada

Laptop- und Tablet-Bildschirme Tools, Adhesive tape Installers Find installer near you  
Home  /  Tutorials  /  HP  /  HP 15 Notebook PC

Replacement of screen on HP 15 Notebook PC screen made by LaptopScreen.com

Shut down the laptop

To begin shut down the computer by holding the power button and disconnect the AC power remove the
battery if it is easily accessible otherwise be extra careful during disassembly and especially when
disconnecting and reconnecting the video connector

Remove the bezel

Proceed on removing the bezel in certain cases it is held down with two or four screws in each corner
that can be hidden behind either plastic or rubber covers. In this case there are no bezel screws pull
away the bezel by the inner Edge starting from the sides. Be gentle and try not to break any of the
plastic tabs underneath. Sometimes the bezel may also be glued on the inner edge. You may need to
open the clam shell fully to unsnap the hinge covers portion of the bezel. Set the bezel aside

Disconnect the screen

The LCD panel is held in place by four Phillips screws located on the front mounting tabs in each of
the corners. Remove the two bottom screws then the two top screws. Place the LCD panel on the
keyboard. Peel the screen tape securing the video cable. Gently disconnect the video cable. Discard
the old panel

Connect the new screen

Place the new LCD panel face down on the keyboard. Reconnect the video cable and secure it with
clear tape. Caution it is very important to not force any of the connectors all connectors are extreme
extremely fragile. You must not slant the video connector when plugging it in

Install the screen

Lift the screen up aligning it with a back cover and remove the protective film. Replace the front LCD
mounting screws at the top and at the bottom corners

Test the screen

At this point we can test out the new screen. Reconnect the power cable turn the laptop on and if
the startup graphics appear the screen is installed correctly. Hold the power button to cancel the
boot up

Replace the bezel

Start at the bottom hinge covers and go around the perimeter snapping its tabs in place. Make sure that
the bezel is also glued along the inner bottom edge. Replace the battery reconnect the AC power turn
on the laptop and you're done!


Zurück nach oben

Diese Webseite ist SSL gesichert!
Unternehmen
Garantie
Versand
Zahlung
Kehrt zurück
About Us
Adresse
Was wir verkaufen
Laptop- und Tablet-Bildschirme
Werkzeuge und Reiniger
Unterstützung
Kontaktiere uns
Support-Tickets
Neukunde
Finde uns:
® Trade-mark of Interac Inc. Used under licence ©
2005 — 2026 Laptop Screen Int. Inc. Nicht autorisierte Reproduktion verboten
Datenschutzerklärung AGB
Sprache auswählen
English French Italian Spanish
Datenschutzerklärung
AGB