Replacement Lenovo ThinkPad 11e screen by laptopscreen.com

To begin press and hold the power button on the right side of the laptop.
Disconnect the power cord

Remove the bezel

Next step is to remove two tiny round pieces of plastic which cover screws in the bottom
corners of the bezel. Use a craft knife to pick the covers. Using Phillips screwdriver remove
two screws in the corners. Insert a plastic pick between the bezel and the LCD. Move the
pick around the perimeter unsnapping the bezel. Put the bezel aside

Remove four screws

Using the same screwdriver remove four screws from the corners of the screen. Place the
screen on the keyboard

Disconnect the video cable

Using plastic pick and fingers peel off the clear tape securing the video connector.
Open the connector's bracket. Disconnect the video cable and discard the old screen

Connect the new screen

Place the new screen on the keyboard. Reconnect the video cable. Close the
connector's bracket and secure it with clear tape

Test the new screen

Lift the screen up and lean it against the back cover. Now we can test the new screen.
Reconnect the power cord and turn the laptop on. The screen is working and
we can finish installation process

Install the new screen

Replace four Phillips screws in the corners of the screen

Replace the bezel

Start from the bottom and then go around the perimeter snapping tabs back in place.
Replace two Phillips screws in the bottom corners of the bezel. Replace two plastic cover.

Turn the laptop on and we are done!