Replacement of screen on Lenovo ThinkPad P1 screen by LaptopScreen.com

Tools

For the replacement process we will need the following tools: Plastic pick and tweezers

Shut down the laptop

To begin turn off the laptop and disconnect the power cord

Remove the bezel

Now we can remove the bezel. Insert a plastic pick between the bezel and the screen.
Move it along the inner edge while unsnapping the tabs underneath

Remove adhesive strips

The screen is held in place with two adhesive strips with two loose tabs in the top corners.
Using tweezers pick the tab in the right top corner and pull out adhesive strip. Pull out the
adhesive strip from the other side of the screen. Place the screen on the keyboard

Disconnect the video cable

The video cable is attached to the back cover with a small piece of tape. Using plastic pick
peel off the tape. Peel off another piece of tape securing the video connector. Using plastic
pick open the connector's bracket. Disconnect the video cable. Discard the old screen

Connect the new screen

Place the new screen on the keyboard. Reconnect the video cable, close the connector's
bracket. Secure it with a clear tap

Install the new screen

Place the screen back on the keyboard. We are going to use a new set of adhesive strips
which you can buy on our site: https://www.laptopscreen.com/English/section/tools/
Apply two adhesive strips on both side of the screen. Lift the screen up. Using micro fiber
cloth rub firmly to catch the adhesive. Make sure the video cable is tightly fit under the screen

Replace the bezel

Press firmly in the bottom corners then go along the perimeter snapping bezel in place.
Close the laptop and make sure that bezel is snapped near the hinges.

Turn the laptop on. And we are done!