Replacement of screen on Lenovo ThinkPad T460 laptop screen by lapptopscreen.com

Tools

For the replacement process we will need: a plastic pick ,a Phillips screwdriver and an
X-acto knife

Shut down the laptop

To begin turn the laptop off and disconnect the power cord. Remove the battery from the
bottom

Remove the first bezel

This laptop has two bezels. Start removing the first floppy bezel. Insert a plastic pick
between the bezel and the LCD. Move the pick around the perimeter. Insert the plastic
pick between the bezel and the back cover. Move it along the edges. Use X-acto knife
to cut strands of glue. Put the bezel aside

Remove the second bezel

Now we can remove the second inner bezel. Use X-acto knife to remove glue covering
the Phillips screws in the corners. Remove 4 screws. Use plastic pick to separate the bezel
from the back cover. Put the bezel aside

Disconnect the LCD

Now we have access to the LCD. Place the screen on the keyboard. Using plastic pick
open the connector’s bracket. Using both hands disconnect the video cable.
Discard the old screen

Connect the new screen

Place the new screen on the keyboard. And using both hands gently reconnect the video
cable and close the connector’s bracket. CAUTION! It is very important not to
force any connectors. Also make sure not to twist or slant the connector when plugging it in

Test the new screen

Lift the screen up and lean it against the back cover. Test the new screen. The screen is working
and we can finish the installation process

Replace the inner bezel

Go around the perimeter fitting bezel in place. Replace four Phillips screws in the corners

Replace the outer floppy bezel

It still has a glue sufficient to hold it in place. Go around the perimeter applying some pressure.
Make sure that the bezel is in place at the bottom and near the hinge covers.

Replace the battery, reconnect the power cord, turn the laptop on
and we are done!