Replacement of screen on Asus ROG GA401Q screen made by LaptopScreen.com

Tools

For the replacement process we will need the following tools.
Tweezers
Plastic Pick

Shut down the laptop

To begin turn the laptop off and disconnect the power cord

Remove the bezel

Now we can remove the bezel. Start from the left side and go around the perimeter unsnapping
the tabs underneath. Put the bezel aside

Disconnect the video cable

Place the screen on the keyboard. Using plastic pick and fingers start peeling off the clear
tape from the video connector. Disconnect the video cable

Connect the new screen

Take the new LCD screen and place it on the keyboard. Using both hands reconnect the video cable.
Secure it with a clear tape. CAUTION! It is very important not to force any of the connectors.
As well you must not twist or slant the connector when plugging it in

Test the new screen

Now we can test the new screen. Lift the screen up and lean the screen on the back cover.
Turn the laptop on and if the start up graphics appear we can finish the replacement process

Reinstall the new screen using new adhesive strips

Your new display is likely to come with no adhesive. We offer standard double-sided
ape for such repairs on our site: https://www.laptopscreen.com/English/section/tools/
Use alcohol and a piece of cloth to clean the back side of the LCD and the inner side of
the back cover. Apply adhesive strips on the back of the new LCD. Lift the screen up
and apply some pressure to the display along its edges to catch the adhesive

Replace the bezel

Remove the protective film. Replace the bezel. Start from the bottom corners and then go
around the perimeter snapping the tabs back in place. Close the laptop and make sure that
all the tabs are snapped along the hinge cover.

Turn the laptop on. And we are done!